Rosslare Enterprises Ltd AYC-T65 User Manual
Wiring Instructions
16
AYC-Ex5 and AYC-T65 Installation and Programming Manual
4.
Wiring Instructions
The unit is supplied with a 60-inch (1.5 meter) pigtail, having a 6-
conductor cable. To connect the unit to the controller, perform the
conductor cable. To connect the unit to the controller, perform the
following:
Prepare the unit's cable by cutting the cable jacket back 1¼ inches
Prepare the unit's cable by cutting the cable jacket back 1¼ inches
and strip the wire ½ inch. Prepare the controller cable by cutting the
cable jacket back 1¼ inches and strip the wire ½ inch.
Splice the unit’s pigtail wires to the corresponding controller wires
Splice the unit’s pigtail wires to the corresponding controller wires
and cover each connection.
Refer to Table 1 and to the wiring diagrams provided on the following
Refer to Table 1 and to the wiring diagrams provided on the following
pages.
Table 1: Wiring Colors
Reader
Controller
Color Functionality
5~16 VDC
5~16 VDC
Red
+DC Input
Shield/Ground
Shield/Ground
Black
Ground
Data 1/Clock
C 1
White
Communication
Data 0/Data
C 2
Green
Communication
LEDCTL
AUX. IN
Brown LED Control/Auxiliary Input
Tamper
Tamper
Purple Tamper
If the tamper output is used, connect the purple wire to the correct
input on the controller when used as a reader, or to a zone input of
input on the controller when used as a reader, or to a zone input of
an intruder alarm system when used as a controller.
Trim and cover all unused conductors.
Trim and cover all unused conductors.