DTC Communications Inc. PDTX250S User Manual
DTC COMMUNICATIONS, INC.
6
INTRODUCTION
The Palladium Series of digital video transmitters provide exceptional video
quality in high multipath environments. They are ideal for use inside
buildings, in urban areas, and in other applications where multipath
would normally cause video tearing or breakup.
quality in high multipath environments. They are ideal for use inside
buildings, in urban areas, and in other applications where multipath
would normally cause video tearing or breakup.
All Palladium Series transmitters are designed for spectrum-efficient 2.5
MHz channel spacing. Approximately 400 carriers are used to transmit
video and two channels of voice and data. Palladium transmitters may be
located on adjacent channels without a guard band. AES 128-bit
encryption ensures users of secure communications.
MHz channel spacing. Approximately 400 carriers are used to transmit
video and two channels of voice and data. Palladium transmitters may be
located on adjacent channels without a guard band. AES 128-bit
encryption ensures users of secure communications.
The Palladium 100 is a small transmitter with a 100 mW RF power output.
This unit is ideal for concealments and shorter range robotic and UAV
applications. The package is only 7.5” x 2.5” x 0.75”. Power consumption is
6 Watts. All connections are conveniently located off the ends of the unit.
Many users will want to power this device with disposable batteries.
This unit is ideal for concealments and shorter range robotic and UAV
applications. The package is only 7.5” x 2.5” x 0.75”. Power consumption is
6 Watts. All connections are conveniently located off the ends of the unit.
Many users will want to power this device with disposable batteries.
The Palladium 250 incorporates an internal power amplifier bringing total
power output to 250 mW. Height and width are identical to the Palladium
100, with the depth of the unit increasing an additional 0.5”. The
Palladium 250 is ideal for many surveillance applications and short to
mid-range robotic and UAV applications.
power output to 250 mW. Height and width are identical to the Palladium
100, with the depth of the unit increasing an additional 0.5”. The
Palladium 250 is ideal for many surveillance applications and short to
mid-range robotic and UAV applications.
Both versions are built out of rugged milled aluminum housings. The
Palladium 250 features mounting tabs for convenient heatsinking (page 8).
Palladium 250 features mounting tabs for convenient heatsinking (page 8).
Palladium Pd-TX-100
100-Milliwatt Digital Transmitter
NOTE: Use only Lithium batteries with this device.