Data Critical Corporation 00DT-7000 User Manual
USE AND MAINTENANCE
12
DT-7000 Operator’s Manual, Revision A
All information contained herein is subject to the rights and restrictions on the title page.
USE AND MAINTENANCE
The DT-7000 and DT-7001 send data and alarm information from bedside monitors
and ventilators to the Central Station.
and ventilators to the Central Station.
The transceivers support the bedside monitors shown in “Appendix A” on page 167.
Power to the DT-7000 is provided through one of the following:
•
the AC power adapter, which provides continuous power
•
the bedside monitor, which provides continuous power
Power to the DT-7001 is provided through one of the following:
•
the AC power adapter, which provides continuous power
•
the bedside monitor, which provides continuous power
•
the internal battery, which is replaceable by qualified service
technicians
technicians
Note:
See your hospital’s Service Department for battery replacement.
Operating Instructions
The DT-7000 and DT-7001 appearance and functionality are equivalent; however,
only the DT-7001 is capable of using an internal battery as a power source.
only the DT-7001 is capable of using an internal battery as a power source.
Push Button Function and Use
See Figure 1 on page 15 for an image of the DT-7000/DT-7001 controls and LED indi-
cators.
cators.
External Serial Devices (I/O) Ports
The External Serial Device (I/O) ports allow external serial devices or programming
cables to connect and maintain logical communication links between the DT-7000/
DT-7001 and the Central Station.
cables to connect and maintain logical communication links between the DT-7000/
DT-7001 and the Central Station.
Note:
*
External Serial Device (I/O)
Port 1 is currently functional. I/O Ports 2, 3 and
4 will be functional in future product releases.
Remote Record
When depressed, the Remote Record function button will initiate a strip chart
recording at the Central Station.
recording at the Central Station.
Nurse Call
When depressed, the Nurse Call function button will initiate a Nurse Call Alarm at the
Central Station.
Central Station.
Power Button
Pressing the Power button either places the transceiver in or out of Standby Mode.