Seiko Instruments AB000001 User Manual

- 

38

 - 

 9. CHARGING THE BATTERY PACK 

Immediately after purchasing or leaving the printer unused for long periods of time, charge the battery 

pack before use. 

This battery pack does not need to be used up or discharged before charging. 
The battery pack can be charged when it is installed in the printer connected with an AC adapter.  The 

battery pack can also be charged by a dedicated battery charger. 
 

Q

An AC adapter and an AC cable are needed to charge the battery pack in the printer. 

(1) Turn the printer off. 

(2) Install the battery pack in the printer. 

(3) Connect the AC adapter to the printer. 

(4) Connect the AC cable to the AC adapter and insert the AC plug of the AC cable into the wall outlet. 

(5) The printer turns on automatically and starts charging the battery. 

(6) The POWER lamp continues to light orange while charging.  When charging is completed, the 

POWER lamp lights green.  The charging time depends on the ambient temperature and the voltage 

level of the battery pack. 

Hints 

•  The printer can print or receive data while it is charging the battery pack.  
•  To interrupt charging, turn the printer off. To start recharging, turn the printer on as it 

is.