Park Air Systems Limited B6350 User Manual
DISPLAYING THE TRANSMITTER'S INTERNAL REFERENCE FREQUENCY SCREEN
To display the transmitter's internal reference frequency screen, use the following procedure.
1.
From the Main screen, press the switch to
display the Options menu. Turn the switch
until Configure is highlighted. Press the
switch.
display the Options menu. Turn the switch
until Configure is highlighted. Press the
switch.
2.
Ensure the Configure menu is displayed.
Turn the switch until Settings is highlighted,
then press the switch.
Turn the switch until Settings is highlighted,
then press the switch.
3.
Check that the Function menu is displayed
and turn the switch until Reference Freq is
highlighted. Press the switch.
and turn the switch until Reference Freq is
highlighted. Press the switch.
4.
Ensure the Reference menu is displayed.
5.
To exit the screen, wait for 30 seconds when
the display automatically reverts to the Main
screen, or select Cancel.
the display automatically reverts to the Main
screen, or select Cancel.
Section 2
T6T AM-Voice Operation
Page 40
F r e q u e n c y
C h a n n e l
C o n f
i g u r e
B I T
E x i
t
S e t t
i n g s
S / W
V e r s i o n s
S t a n d b y
B a c k
E x i
t
M o d e
R e f e r e n c e
F r e q
D i s p l a y
> >
R e f
F r e q
5 0 . 0 %
C a n c e l
O K
Caution!
This procedure is included only for informational purposes. The reference frequency setting
must not be altered unless following the procedure given in the T6T maintenance handbook.
External test equipment is required to set this parameter.
must not be altered unless following the procedure given in the T6T maintenance handbook.
External test equipment is required to set this parameter.
Failure to comply with this caution may render the transmitter inoperable.