Tait International Limited TPDHBB User Manual

 

QoS 
(P25 channels 
only)

Displays information about the quality of service 
(received signal strength (RSSI) with an indication of 
digital voice quality). Also displays the channel 
status (CNV, TCH, CCH

) and the mode (PH1 or 

PH2

). 

RSSI

Displays the received signal strength (RSSI) of the 
current channel.

Rx Tone

Receives a 1011 Hz or 1031 Hz tone and displays 
the received signal strength (RSSI) and the bit error 
rate (BER) of the received signal. Also displays the 
channel status (CNV, TCH, CCH

) and the mode 

(PH1 or PH2

). On a P25 conventional channel, the 

user can select whether to receive a 1011 Hz (Phase 
1) or 1031 Hz (Phase 2) tone. On a P25 trunked 
channel, the network selects whether 1011 Hz or 
1031 Hz is used.

Site display

Shows the channel number, signal strength and 
system-identity code (SYSCODE) for the currently 
registered trunked site.

Site measure

Lists the current trunked site (indicated with an 
asterisk) and up to six detected adjacent sites, with 
received signal strength (RSSI) information.

Tone test

Generates an audible tone for the duration of the 
test.

Tx Tone

Transmits a tone of 1011 Hz or 1031 Hz on the 
current P25 channel.

Tx Tone Cal

Transmits a 1011 Hz or 1031 Hz tone on the current 
channel with a bit error rate (BER) of 5%.

Tx power test

Displays hardware-related information while the 
radio is transmitting. Information includes the final 
PA current (in mA)

1. CNV = conventional,  TCH = traffic  channel,  CCH = control  channel
2. ANA = analog,  PH1 = P25  Phase  1,  PH2 = P25  Phase  2