Digital Monitoring Products Inc 1122 User Manual
LT-1647 © 2017 Digital Monitoring Products, Inc.
17164
DESCRIPTION
Figure 1: 1122 Wireless PIR
Motion Detector
1
PROGRAM THE PANEL
When programming the 1122 in the panel, refer to the panel
programming guide as needed.
1. In
ZONE INFORMATION, enter the wireless ZONE number.
2. Enter the
ZONE NAME.
3. Select
NT (Night) as the ZONE TYPE.
4. Select the
AREA.
5. At the
NEXT ZONE prompt, select NO.
6. Select
YES when WIRELESS? displays.
7. Enter the eight-digit
SERIAL# and press CMD.
8. Enter the
SUPRVSN TIME and press CMD.
9. Choose whether or not to enable
DISARM DISABLE.
Note: Selecting YES allows the 1122 to be disabled for
Night and Exit type zones while the area is disarmed.
10. Choose either
2 or 4 for the PULSE COUNT.
Note: The pulse count is the number of pulse inputs
(trips) the 1122 needs to sense before going into alarm.
11. Choose either
LOW or HIGH for the SENSITIVITY.
Note: Selecting LOW sensitivity may reduce false alarms
for installations in harsh environments.
12. Choose whether or not to enable
PET IMMUNITY.
13. At the
NEXT ZONE prompt, select YES if you are finished
programming the zone. Select
NO if you would like to
access additional programming options.
2
INSTALL THE BATTERY
Use only a 3.0V lithium battery, DMP Model CR123A, or the
equivalent battery from a local retail outlet. Keep in mind, when
setting up a wireless system, program zones and connect the
receiver before installing batteries in the transmitters.
1. Remove the holding screw at the lower end of the 1122
case and gently lift off the cover.
2. Observing polarity, place the battery in the holder and
press into place. See Figure 2 for the battery location.
The 1122 Wireless PIR Motion
Detector uses passive infrared
technology to detect motion in a
wide angle lens pattern.
The 1122 also features an internal
case tamper, survey LED, and low
battery indicator.
Pet immunity is available for animals
up to 55 pounds and can be turned
on or off. Disarm/disable, pulse
count, and adjustable sensitivy are
also offered on the 1122.
Compatibility
All DMP 1100 Series Wireless
Receivers and burglary panels.
What is Included?
•
One 1122 Wireless
PIR Motion Detector
•
One 3V lithium
CR123A battery
Figure 2: 1122 Housing and PCB
Battery
Location
Tamper
Switch
Survey LED
PCB
Screw
1122 WIRELESS PIR MOTION DETECTOR
Installation Guide