Digital Monitoring Products Inc 1122 用户手册

LT-1647 © 2017 Digital Monitoring Products, Inc.

17164

1

When programming the 1122 in the panel, refer to the panel 

programming guide as needed.

1.  In

 ZONE INFORMATION, enter the wireless ZONE number. 

2.  Enter the 

ZONE NAME.

3.  Select 

NT (Night) as the ZONE TYPE. 

4.  Select the 

AREA.

5.  At the 

NEXT ZONE prompt, select NO. 

6.  Select 

YES when WIRELESS? displays. 

7.  Enter the eight-digit 

SERIAL# and press CMD.

8.  Enter the 

SUPRVSN TIME and press CMD.

9.  Choose whether or not to enable 

DISARM DISABLE.  

Note: Selecting YES allows the 1122 to be disabled for 

Night and Exit type zones while the area is disarmed.   

10.  Choose either 

2 or 4 for the PULSE COUNT.  

Note: The pulse count is the number of pulse inputs 

(trips) the 1122 needs to sense before going into alarm.

11.  Choose either 

LOW or HIGH for the SENSITIVITY.  

Note: Selecting LOW sensitivity may reduce false alarms 

for installations in harsh environments.

12.  Choose whether or not to enable 

PET IMMUNITY. 

13.  At the

 NEXT ZONE prompt, select YES if you are finished 

programming the zone. Select 

NO if you would like to 

access additional programming options.

2

Use only a 3.0V lithium battery, DMP Model CR123A, or the 

equivalent battery from a local retail outlet. Keep in mind, when 

setting up a wireless system, program zones and connect the 

receiver before installing batteries in the transmitters.

1.  Remove the holding screw at the lower end of the 1122 

case and gently lift off the cover. 

2.  Observing polarity, place the battery in the holder and 

press into place. See Figure 2 for the battery location.

The 1122 Wireless PIR Motion 

Detector uses passive infrared 

technology to detect motion in a 

wide angle lens pattern. 

The 1122 also features an internal 

case tamper, survey LED, and low 

battery indicator. 

Pet immunity is available for animals 

up to 55 pounds and can be turned 

on or off. Disarm/disable, pulse 

count, and adjustable sensitivy are 

also offered on the 1122. 

All DMP 1100 Series Wireless 

Receivers and burglary panels. 

• 

One 1122 Wireless  

PIR Motion Detector

• 

One 3V lithium  

CR123A battery