Digital Monitoring Products Inc PC0137R2 User Manual

LT-1608  © 2017 Digital Monitoring Products, Inc.

17103

1

Select a central location for the 738Zplus Z-Wave Interface 

Module. Keep in mind that at least one Z-Wave Plus device 

must be within 65 feet of the 738Zplus. Most Z-Wave Plus 

devices act as repeaters for the signal to create longer and 

multiple transmission routes (battery-powered Z-Wave Plus 

devices do not repeat signals in order to extend battery life). 

See Figure 2.

Note: Place the module away from large, metal objects 

to avoid interference with the Z-Wave Plus signal.

2

1.  With the housing cover off, carefully remove the 

738Zplus’s PCB from the housing.

2.  Use the supplied screws to secure the 738Zplus 

housing against a wall or flat surface. See Figure 3.

The 738Zplus Z-Wave Interface 

Module allows DMP panels to 

communicate with up to 232 

Z-Wave or Z-Wave Plus devices, 

such as light controls, light bulbs, 

door locks, garage door openers, 

and thermostats.

The 738Zplus is automatically 

recognized by DMP panels, and no 

additional programming is required. 

Once the 738Zplus is connected to 

a DMP panel, users can immediately 

begin adding Z-Wave devices to 

their system.

The 738Zplus connects to the 

panel’s keypad bus and takes 

control of the system’s Z-Wave Plus 

devices using an integrated wireless 

network. Devices can be remote 

controlled from smartphones using 

the DMP Virtual Keypad™ app, 

or from any mobile device using 

MyAccess™ text commands.

The 738Zplus module is compatible with:

•  

DMP XT30/XT50 Series panels, 
Version 171 or higher

•  

All Z-Wave and Z-Wave Plus 
devices

One model 738Zplus with housing 

and a hardware pack

= Z-Wave Plus Device

Office

Dining

Living Room

Foyer

Kitchen

Garage

Control 

Panel with 

738Zplus

Mounting Holes