Digital Monitoring Products Inc PC0159 User Manual

7

(Accessed through the User Menu to program your Z-Wave Devices, User Codes, etc.) Your system may include a

DMP Z-Wave controller. The Z-Wave controller allows short range radio control of Z-Wave devices that you or your

installation company may provide such as lighting control modules, thermostat controls, and door locks. Z-Wave

Setup allows you to program the system to control the Z-Wave devices. You may control your Z-Wave devices

from your iPhone/iPad or Android device using the DMP Virtual Keypad App or from your keypad by activating a

Favorite from the Favorites User Menu. The available setup options are: Add, List, Remove, Favorites, Transfer and

Rediscover.

•  Select ADD to add a Z-Wave device to your system.
•  Select LIST to display a list of Z-Wave devices already added and stored in your system.
•  Select REMOVE to completely remove a Z-Wave device from your system.
•  Select FAV to Add, Edit or Remove a Favorite.
•  Select XFER to transfer Z-Wave device information from another manufacturer’s portable Z-Wave controller

to your system.

•  Select REDISC to require your system to rediscover and confirm radio communication with all of the added

Z-Wave devices.

This option allows you to ADD a Z-Wave device to your system. Once added, a Z-Wave device may be assigned to a

Favorite.
1.  Access the User Menu.
2.  Press COMMAND until ZWAVE SETUP? displays.
3.  Press any Select key. The keypad displays ADD LIST REMOVE.
4.   Select ADD. PROCESSING may briefly display. When PRESS BUTTON ON DEVICE TO ADD displays press the

program button on the Z-Wave device. See the Z-Wave device’s documentation for more information.

5.  When the device information is received by the system, the keypad beeps once and displays DEVICE FOUND.
6.  Once added, the keypad displays the type of device and the default device name. Press COMMAND.
7.   Press any top row Select key and enter up to a 16 character custom name for the device. See Entering Names

in Appendix D.

8.  Press the COMMAND key to store the new name.

Note: A maximum of 232 Z-Wave devices can be added to the system. When the maximum number of devices have been

added, the keypad displays ZWAVE TABLE FULL and no additional Z-Wave devices may be added without removing

some existing devices.

This option allows you to edit the name of a Z-Wave device or confirm radio communication with the Z-Wave

device. When LIST is selected, the first Z-Wave device stored in the system is displayed. Remaining devices can

be viewed by pressing the COMMAND key. Lighting control modules, are displayed first, followed by door locks and

then thermostat controls.
The available LIST options are: Rename and Status.

•  Select RENAME to enter up to 16 characters for a new device name.
•  Select STATUS to confirm radio communication with the Z-Wave device.

1.  Access the User Menu.
2.  Press COMMAND until ZWAVE SETUP? displays.
3.  Press any Select key. The keypad displays ADD LIST REMOVE.
4.  Select LIST to display DEVICE LIST and the first Z-Wave device stored. Press the COMMAND key to advance

through the list of Z-Wave devices.

5.  Press any Select key to display DEVICE RENAME STATUS.
6.  Select RENAME and enter up to 16 characters for a new device name. See Entering Names in Appendix D.
7.  Press COMMAND to save the new Z-Wave device name and return to the DEVICE LIST.