Digital Monitoring Products Inc PC0159 User Manual

9

7.   Select ADD and the first Z-Wave device stored in the system that has not already been added to this Favorite is 

displayed. Remaining devices can be viewed by pressing the COMMAND key.

8.   Press any Select key to assign the displayed device to the Favorite. The device name and the current device 

settings display. When added to a Favorite, a Z-Wave device can be programmed to respond to various ON/

OFF/LOCK/UNLOCK/HEAT/COOL commands based on your desired settings. To change a device setting, See

Device Settings in Favorites.

1.  Press any Select key at SETTING: and ON OFF DIM displays. Press the Select key under the desired setting.
2.   For ON or OFF setting, when selected, the Favorite name and the next Z-Wave device stored in the system

displays.

3.   For DIM setting, DIM LEVEL: with the current setting displays. To change the setting, press any Select key and

enter the new level (1 - 10) and Press COMMAND.

4.  The Favorite name and the next Z-Wave device stored in the system displays.

1.   Press any Select key at SETTING: and LOCK UNLOCK displays. To

change the setting, press the Select

key under the new setting.

2.  The Favorite name and the next Z-Wave device stored in the system displays.

1.   Press any Select key at SYSTEM: and OFF CL HT displays. To change the setting of OFF, COOL or HEAT, press

the Select key under the new setting.

2.  Select OFF to display FAN SETTING:.
3.  Press any Select key and ON AUTO displays. Press the Select key under the desired new setting to change.
4.  Select CL to display COOL.
5.  To change the setting, press any Select key, enter the new temperature and press COMMAND.
6.   Press any Select key and the keypad displays 

FAN SETTING:.

7.  Press any Select key and ON AUTO displays. Press the Select key under the desired new setting to change.
8.  Select HT to display HEAT.
9.  To change the setting, press any Select key and enter the new temperature and Press COMMAND.
10.   Press any Select key and the keypad displays 

FAN SETTING:.

11.  Press any Select key and ON AUTO displays. Press the Select key under the desired new setting to change.
12.  The Favorite name and the next Z-Wave device stored in the system displays.
Note: A maximum of 25 devices can be assigned to each Favorite. When attempting to add a device and the

maximum number of devices has been assigned, FAVORITE FULL is displayed. No additional Z-Wave devices

may be added to this Favorite, however a new Favorite may be created and devices added to the new 

Favorite.

1.  Access the User Menu.
2.  Press COMMAND until ZWAVE SETUP? displays.
3.  Press any Select key. The keypad displays ADD LIST REMOVE.
4.  Press COMMAND again to display FAV XFER REDISC. Select FAV and FAVORITE NUMBER: - is displayed.
5.  Enter a Favorite number between 1 and 20 and press COMMAND.
6.  The Favorite number and name displays. Press COMMAND and the Favorite Name and ADD EDIT REMOVE

displays.

7.  Select EDIT and the first Z-Wave device stored in the Favorite displays. Remaining devices can be viewed by 

pressing the COMMAND key.

Note:   Z-Wave devices are displayed by device type; Lights first, followed Locks, and Thermostats last. By pressing

the COMMAND key you can scroll through the devices assigned to the selected Favorite.

8.  Press any Select key to display the device name and the setting for the device.
9.  To change the setting, See Device Settings in Favorites.
10.  Once the device settings have been entered, the Favorite name and the next Z-Wave device stored in the

selected Favorite displays.