Digital Monitoring Products Inc PC0163 User Manual

22

Your system may include a DMP Z-Wave controller. The Z-Wave controller allows short range radio control of

Z-Wave devices that you or your installation company may provide such as lighting control modules, thermostat

controls, doors, and garage doors. Z-Wave Setup allows you to program the system to control the Z-Wave

devices. You may control your Z-Wave devices from your Smartphone using the DMP Virtual Keypad App or

with the Virtual Keypad Browser. The available setup options are: Add, List, Remove, Favorites, Transfer and

Optimize.
•  Select ADD to add a Z-Wave device to your system.
•  Select LIST to display a list of Z-Wave devices already added and stored in your system.
•  Select REMOVE to completely remove a Z-Wave device from your system.
•  Select FAV to Add, Edit or Remove a Favorite.
•  Select XFER to transfer Z-Wave device information from another manufacturer’s portable Z-Wave controller to

your system.

•  Select OPT to update communication with all Z-Wave devices programmed on your system. OPT can be used

to re-establish communication after a Z-Wave device has been moved to a different location.

Note: Only Master User Code Level can access Z-Wave Setup through the User Menu to program your Z-Wave

devices. For information on adding Z-Wave devices from the Virtual Keypad App, tap Online Help from the

Settings tab from the App.

This option allows you to ADD a Z-Wave device to your system. Once added, a Z-Wave device may be assigned to

a Favorite.
Access the User Menu.
Press COMMAND until ZWAVE SETUP? displays.
Press any Select key. The keypad displays ADD LIST REMOVE.
Select ADD. PROCESSING may briefly display. When PRESS BUTTON ON DEVICE TO ADD displays press the program

button on the Z-Wave device. See the Z-Wave device’s documentation for more information.

When the device information is received by the system, the keypad beeps once and displays DEVICE FOUND.
Once added, the keypad displays the type of device and the default device name. Press COMMAND.
Press any top row Select key and enter up to a 16 character custom name for the device.
Press the COMMAND key to store the new name.
Note: A maximum of 232 Z-Wave devices can be added to the system. When the maximum number of devices have

been added, the keypad displays ZWAVE TABLE FULL and no additional Z-Wave devices may be added without

removing some existing devices.

This option allows you to edit the name of a Z-Wave device or confirm radio communication with the Z-Wave

device. When LIST is selected, the first Z-Wave device stored in the system is displayed. Remaining devices can

be viewed by pressing the COMMAND key. Lighting control modules, are displayed first, followed by doors and

then thermostat controls.
The available LIST options are: Rename and Status.
•  Select RENAME to enter up to 16 characters for a new device name.
•  Select STATUS to confirm radio communication with the Z-Wave device.

1.  Access the User Menu.
2.  Press COMMAND until ZWAVE SETUP? displays.
3.  Press any Select key. The keypad displays ADD LIST REMOVE.
4.   Select LIST to display DEVICE LIST and the first Z-Wave device stored. Press the COMMAND key to advance

through the list of Z-Wave devices.

5.  Press any Select key to display DEVICE RENAME STATUS.
6.  Select RENAME and enter up to 16 characters for a new device name. See Entering Names in Appendix D.
7.  Press COMMAND to save the new Z-Wave device name and return to the DEVICE LIST.