Digital Monitoring Products Inc PC0163 User Manual

23

1.  Access the User Menu.
2.  Press COMMAND until ZWAVE SETUP? displays.
3.  Press any Select key. The keypad displays ADD LIST REMOVE.
4.   Select LIST to display DEVICE LIST and the first Z-Wave device stored. Press the COMMAND key to advance

through the list of Z-Wave devices.

5.  Press any Select key to display DEVICE RENAME STATUS.
6.  Select STATUS to confirm radio communication with the Z-Wave device.
7.  The device name and OKAY displays when the device stored in the system communicates.
8.  Press the COMMAND key to return to the device list and display the next device in the list.
9.   If the device stored in the system does not communicate, the device name and FAILED displays. Press the

COMMAND key and REMOVE FAILED DEVICE displays.

10.   Select YES to remove the failed device from the system memory. Select NO to leave the device in the system

memory and to return to the device list.

11.   When the device has been removed, the device name and REMOVED is displayed and the system no longer

tries to communicate with the Z-Wave device.

Each Z-Wave device added to your system remains in your system unless it is removed. This option allows you to

remove Z-Wave devices from your system.
1.  Access the User Menu.
2.  Press COMMAND until ZWAVE SETUP? displays.
3.  Press any Select key. The keypad displays ADD LIST REMOVE.
4.   Select REMOVE. PROCESSING may briefly display. When PRESS BUTTON ON DEVICE TO REMOVE displays press

the program button on the Z-Wave device, the device name and REMOVED is displayed to indicate the

Z-Wave device has been removed.

Z-Wave devices can be grouped together to create a Favorite. This option allows you to program up to 20

Favorites in your system and then ADD, EDIT OR REMOVE up to 25 Z-Wave devices in a Favorite. When activated

from the FAVORITE user menu, a command is sent to its Z-Wave Devices. A Favorite can only be activated, or

turned on. A separate Favorite must be created to change the conditions set by the first Favorite. For example, a

Favorite called “Movie Night” could lock the exterior doors, close the garage door, adjust the temperature, and

dim the lights in the family room to the desired level. Another Favorite called “Wakeup” could then turn on the

lights, adjust the temperature, unlock the exterior doors, and raise the garage doors.

1.  Access the User Menu.
2.  Press COMMAND until ZWAVE SETUP? displays.
3.  Press any Select key. The keypad displays ADD LIST REMOVE.
4.  Press COMMAND again to display FAV XFER OPT. Select FAV and FAVORITE NUMBER: - is displayed.
5.   Enter a Favorite number between 1 and 20 and press COMMAND. If the Favorite number entered is 

unassigned, *UNUSED* displays. If the Favorite is already assigned, you may change the name or press the

back arrow and enter a new number.

6.   Press any Select key and a cursor displays. Enter a Favorite name up to 16 characters. To remove a Favorite, 

press Command without entering a name.

7.  Press COMMAND to save the Favorite and the Favorite name and ADD EDIT REMOVE displays.