Digital Monitoring Products Inc PC0181 User Manual

Model 372-500-W plug-in DC power supply

Input: 

 

 

120VAC, 60 Hz

Output: 

 

 

12VDC

Standby Battery: 

 

DMP 3.8VDC Lithium, 800mAh

Optional Standby Battery  

DMP 3.8VDC Lithium, 3500mAh

All circuits inherent power limited

Optional CDMA cellular module to send messages to DMP Model SCS-1R or SCS-VR Central Station Receivers.
Built-in Wi-Fi™ network alarm signal communication to DMP Model SCS-1R or SCS-VR Central  

Station Receivers.

You can associate up to 4 alphanumeric 9000 Series or 9862 Graphic Touchscreen Wireless Keypads. 

•  XTLplus has 48 wireless initiating zones numbered 1-48
•  Zone and Output numbers 51 to 54 and 61 to 64 can support 1144 Series Key Fobs, Output Modules,  

or sirens

The XTLplus panel ships in a plastic enclosure with a user’s guide and programming sheet.

5.5” W x 3.75” H x 1” D

White (W)

The panel can be programmed to operate as any of the following system types:
•  All/Perimeter system that provides one perimeter area and one interior area
•  Home/Sleep/Away system that provides one perimeter, one interior, and one bedroom area. The bedroom 

area provides for any protection devices the user wants disarmed during their sleeping hours and armed in 

the Away mode.

•  Six area system that provides areas of protection that can be independently armed or disarmed.

Throughout this guide you will see caution notes containing information you need to know when installing 

the panel. These cautions are indicated with a yield sign. Whenever you see a caution note, make sure you 

completely read and understand its information. Failing to follow the caution note can cause damage to the 

equipment or improper operation of one or more components in the system.

For applications that must conform to a local authorities installation standard or a National Recognized 

Testing Laboratory certificated system, please see the Listed Compliance Specifications section near the end 

of this guide for additional instructions.