Digital Monitoring Products Inc PC0199 User Manual
Digital Monitoring Products | XTLtouch Installation Guide
11
IN WALL INSTALLATION
Prepare for Backbox Installation
1.
Place the included backbox
template on the wall in the desired
location.
template on the wall in the desired
location.
2. Cut along the inside of the
template border line, ensuring to
not square the corners.
not square the corners.
3. Place the two included #6 screws
approximately 1/4” into the two
locking tab holes on the rear wall
of the backbox.
locking tab holes on the rear wall
of the backbox.
1
Figure 8: Screw Locations