Sigma Designs Inc ZM5304-U User Manual

Page of 35
Datasheet: ZM5304 
 
 
 
DSH12461-3 | 7/2013 
OVERVIEW 
The ZM5304 Modem is a fully integrated module with an on-board antenna that allows the establishment of a Z-Wave network 
with minimum risk. The SD3503 modem chip is used with an external NVM (EEPROM), 32MHz crystal, power supply decoupling, 
SAW filter, matching circuit, and a helical antenna.  Figure 2.1 shows the main blocks of the  ZM5304 Modem, while  Figure 2.2 
illustrates the firmware stack of an example application. 
EEPROM 
Memory
ZM5304
TXD
USB_DP
RESET_N
USB_DM
RXD
VDD
SPI
Voltage 
Regulator
UART
USB
Sub-1 GHz 
Radio 
Transceiver
SD3503
SAW Filter & 
Matching
Helical 
Antenna
32MHz 
XTAL
8051 CPU
Decoupling
Flash 
Memory
AES
ADC
POR / BOD
 
Figure 2.1: Functional block diagram 
 
HOST
Application
UART / USB
ZM5304
Z-Wave
®
 Serial API
Z-Wave
®
 Protocol Stack
Network Layer
MAC Layer
PHY Layer
ITU G.9959
 
Figure 2.2: Firmware stack 
2.1  PERIPHERALS 
2.1.1  ADVANCED ENCRYPTION STANDARD SECURITY PROCESSOR 
The Z-Wave protocol specifies the use of Advanced Encryption Standard (AES) 128-bit block encryption for secure applications. 
The built-in Security Processor is a hardware accelerator that encrypts and decrypts data at a rate of 1 byte per 1.5µs. It encodes