The Alpha 9500 is easy to set up, tune, operate, and maintain.
However, failure to carry out each procedure exactly as described in
this manual is likely to lead to amplifier damage, which is not covered
under warranty. Damage to other station equipment may also result.

Proceed slowly throughout these procedures to avoid bumping and
damaging adjacent wires, connectors, and components.

4.1 Unpack the Amplifier and Transformer

Procedure 4-1 Unpack the amplifier and transformer

Step 1

Remove the amplifier and transformer from their cartons.

The Alpha 9500 ships in two heavy-duty cardboard cartons, each
mounted on a wooden pallet and strapped down for secure shipping. The
amplifier weighs 39 lb (18 kg); the transformer weighs 43 lb (20 kg).

Remove the strap securing the two boxes to the pallet.

Inspect the boxes for shipping damage.

Unpack the cartons.

Retain the pallet and cartons in case you need to ship the unit later.

Step 2

Inspect the amplifier and transformer for shipping damage.

If you find damage, call RF Concepts at 303-473-9232.

Step 3

Remove the blower screw from the bottom of the amplifier.

Place the amplifier on the bench or desk where it is to be used.

Remove the cover screws (

Figure