Vertical Communications 7500-00 User Manual

Assembling the IP Phone

2-7

The IP phone can be used on the desktop or mounted on a wall.

Print the screw alignment template (on the next page) and tape it on the wall to 

position the 3 screws provided at the right place for the mount-holes on the phone.

Before mounting the IP phone to the wall, detach the handset and curled cord from 

the IP phone, then perform the following steps:

Step A

On the back of the phone, find the latch (3) on the U-type leg 

and remove it.

Step B

Remove the other latch (4).

Step C

Remove the U-type leg (1). Retain the leg (1) and latches (2) for 

possible reuse in a desktop mode.

Step D

Seat the big U-type frame onto the back of IP phone.

Step E

Re-check that the power source switch is in the correct position. 

Connect all cables to the jacks on the phone, then mount the 

phone's holes (5 top, 6 left and 7 right) to the screws on the 

wall.

Step F

Under the hook switch, find and press the cradle latch (8) to let 

it down. Then hang up the handset and re-attach the curled 

cord.