Alcatel-Lucent USA Inc. LTIMDW9G User Manual
Installing a Single Radio Module in Each Carrier
1
Remove the plastic cap covering each radio
module’s card edge before inserting the radio
module’s card edge before inserting the radio
modules into the carriers.
2
Working from left to right, insert a radio module
into the first slot (Slot 1) of each carrier; hook
each radio module onto the mounting rod. Slowly
swing the radio module’s card edge into the card
swing the radio module’s card edge into the card
edge connector on the back of the carrier. (Excep-
tion: use Slot 6 instead of Slot 1 for a Model 117A3
control carrier.)
tion: use Slot 6 instead of Slot 1 for a Model 117A3
control carrier.)
IMPORTANT:
Slot 6 of a Model 117A3 control carrier must
always contain a radio module to pass the
synchronization signal to the next carrier.
always contain a radio module to pass the
synchronization signal to the next carrier.
A Model 117A4 carrier does not require Slot 6
to be filled.
to be filled.
3
When the card edge is fully seated, a snap lock
on the bottom of the radio module will engage.
4
Insert a telephone line cord into the bottom of
each radio module.
each radio module.
Installing the MDW 9031 Pocketphone
2-33