Alcatel-Lucent USA Inc. LTIMDW9G User Manual
5
Slide the telephone line cords through the cable
manager slot on the left front of each carrier.
manager slot on the left front of each carrier.
6
Insert the free end of the telephone line cord
into the appropriate extension jack or terminal/
into the appropriate extension jack or terminal/
station connector on your communications system
switch/control unit (refer to your communications
system manual for the proper location).
switch/control unit (refer to your communications
system manual for the proper location).
7
Power the carriers as follows:
If the carriers are plugged into...
Then...
One surge suppressor strip
Power the strip.
Result: All carriers will turn on simultaneously.
Result: All carriers will turn on simultaneously.
Wall outlets
Plug in the power for the Carriers in this order:
CAUTION:
Never connect or disconnect expansion cables or telephone line
cords, or insert or remove radio modules, while the carrier is
cords, or insert or remove radio modules, while the carrier is
plugged into the wall outlet.
Keep in mind that a Model 117A3 control carrier must have a module in Slot 6 in order to
synchronize correctly with the remaining carrier(s).
synchronize correctly with the remaining carrier(s).
2-34
Installing the MDW 9031 Pocketphone