Futaba Corporation T16SZ-24G User Manual

The dedicated mixes, etc. usable when airplane 

or glider model type is selected are displayed 

in this Model menu functions section. First use 

the Model type function of the Linkage menu to 

preset the model type, wing type, and tail type 

matched to the fuselage used. Other settings reset 

the data used in mixing function, etc.

These dedicated mixes can be set for each 

flight condition, as required. When you want to 

use the system by switching the settings for each 

condition by switch or stick position, use the 

Condition select function to add flight conditions. 

(Up to 8 conditions can be used)

Note: The T16SZ is designed so that the airplane and 

glider model types can handle aircraft of the same 

wing type.

The functions common to airplanes and gliders, 

except some dedicated functions, are summarized 

without regard to the model type.

The setting items are different, depending on the 

number of servos, etc. according to the wing type 

used. The setup screens in the instruction manual 

are typical examples.

This function adjusts the left and right ailerons. 

Roll axis correction and fine tuning with a VR are also 

possible. This is convenient when making settings 

during flight.

[Airplane/glider, 2 ailerons or more]

The flaps can be adjusted independently. For a 4 

flaps model, the camber flaps can be mixed with the 

brake flaps. [Airplane/glider, 2 flaps or more]

AIL → Camber flap

This mix operates the camber flaps in the aileron 

mode. It improves the operation characteristic of the 

roll axis. [Airplane/glider, 2 ailerons + 2 flaps or more]

This mix operates the brake flaps in the aileron 

mode. It improves the operation characteristic of the 

roll axis. [Airplane/glider, 4 flaps or more]

This mix is used when you want to operate the 

rudder at aileron operation. Banking at a shallow bank 

angle is possible. [Airplane/glider, general]

This mix is used when you want to the mix camber 

flaps with elevator operation. Lifting force can be 

increased at elevators up. [Airplane/glider, 2 ailerons or 

more]

(Model menu screen example)
*The Model menu screen 

depends on the model type. 

●  Select  the  function

name and return to 

the Home screen.