Nautel Maine Inc VS300 User Manual
VS300 Operations and Maintenance Manual
Operating the transmitter
Issue 0.1 2011-03-11
Page 2-69
Email configuration
Email configuration (see
).
Figure 2.63: Email Configuration page
To configure the email feature, perform the following steps:
1. Enter the four fields, noting the following:
–
Server Name
: In order to enter a server name (e.g., mail.nautel.com), at least one
nameserver IP address must be entered (see
).
–
Port Number
: Enter the addressing information used to identify the senders and
receivers of messages. Typically set to 25 for SMTP systems.
–
Client Name
: Set to a name that associates to the transmitter such as station
identification (e.g., NV40_WXYZ). This name will be included in notification emails.
–
Sender Name
: Enter as a standard email address (e.g., xxxxxxx@yyyyy.zzz).
2. When complete click
Apply
or click
Undo
to restore the previous setting. Use the
Test
button to enter an email address to test your settings. Click the
OK
button to run the test or
the
Cancel
button to return to the
Email Configuration
page.