Nautel Maine Inc VS300 User Manual
VS300 Operations and Maintenance Manual
Operating the transmitter
Page 2-80
Issue 0.1 2011-03-11
Using the front panel
To view the front panel’s TCXO calibration screens (see
), select
System Settings ->
Calibration
from the
Main Menu
.
Figure 2.73: Front Panel - TCXO calibration screens
Use the up or down arrow to place the cursor next to TCXO Offset, then press the accept
(checkmark) button to enter the
(checkmark) button to enter the
TCXO Offset
screen. Use the up and down arrows to set the TCXO
offset value (in ppm) for the external 10 MHz source. When complete, press the accept (checkmark)
button to save the change. Press cancel (
button to save the change. Press cancel (
X
) to discard changes and return to the previous menu.
From the calibration menu, press the down arrow to place the cursor next to Run TCXO Cal, then
press the accept (checkmark) button to enter the
press the accept (checkmark) button to enter the
Run TCXO Cal
screen. The calibration routine will
begin when the external 10 MHz source is connected.