UTC Fire & Security Americas Corporation Inc 785B-ALGRO User Manual
2
Allegro
Preliminary 2/5/02
About This Manual
This manual provides information for planning, installing,
programming, and testing this security system. When nec-
essary, this manual refers you to other documentation
included with compatible devices.
programming, and testing this security system. When nec-
essary, this manual refers you to other documentation
included with compatible devices.
Planning sheets are included for you to record hardware
layout and software programming settings.
layout and software programming settings.
Special Installation Requirements
This security system can be used as an intrusion alarm sys-
tem, a fire alarm system, and an emergency notification
system.
tem, a fire alarm system, and an emergency notification
system.
Some installations may require configurations dictated by
city/state codes, insurance, or Underwriter’s Laboratories
(UL). This section describes the various component and
configuration listings.
city/state codes, insurance, or Underwriter’s Laboratories
(UL). This section describes the various component and
configuration listings.
UL Listed Systems
This section describes the requirements for UL Listed
systems.
systems.
Basic System
Control Panel (60-874-95R).
Standard Class II 8.0 VAC, 300 mA Power Trans-
Standard Class II 8.0 VAC, 300 mA Power Trans-
former; manufacturer—Sino America, (A1014444-0)
ITI Part No. 22-117.
ITI Part No. 22-117.
Dialog Telephone Interface Module (DTIM)
(60-879-95R).
Backup Battery 4.8 VDC rechargable NiCd battery
pack (34-057).
Household Burglary Alarm System Unit (UL 1023)
Basic system, plus:
Hardwire Magnetic Contact (13-068 or 13-071) or
Hardwire Magnetic Contact (13-068 or 13-071) or
Wireless Learn Mode Door/Window Sensor (60-362),
Wireless Learn Mode PIR Motion Sensor (60-703-95
or 60-639).
Wireless Learn Mode PIR Motion Sensor (60-703-95
or 60-639).
RECEIVER TROUBLE set to on.
EXIT DELAY set to 60 seconds or less.
QUICK EXIT set to off.
SIREN TIMEOUT set to 4 minutes or more.
ENTRY DELAY set to 45 seconds or less.
SLEEPY TIME set to off.
EXIT DELAY set to 60 seconds or less.
QUICK EXIT set to off.
SIREN TIMEOUT set to 4 minutes or more.
ENTRY DELAY set to 45 seconds or less.
SLEEPY TIME set to off.
Household Fire Warning System (UL 985)
Basic system, plus:
Wireless Smoke Sensor (60-506-319.5 or 60-848-95)
Wireless Smoke Sensor (60-506-319.5 or 60-848-95)
learned into sensor group 26.
RECEIVER TROUBLE set to on.
SLEEPY TIME set to off.
EXIT EXTENSION set to off.
SLEEPY TIME set to off.
EXIT EXTENSION set to off.
Digital Alarm Communicator System (UL 1635)
Basic system, plus:
AC FAILURE set to on.
LOW CPU BATTERY set to on.
AUTO PHONE TEST set to on.
PHONE TEST FREQUENCY set to one.
NEXT PHONE TEST set to one.
AC FAILURE set to on.
LOW CPU BATTERY set to on.
AUTO PHONE TEST set to on.
PHONE TEST FREQUENCY set to one.
NEXT PHONE TEST set to one.
Central Station Reporting
The panel has been tested with the following central station
receivers using SIA and Contact ID reporting formats:
ITI CS-5000 Central Station Receiver.
Sur-Gard Central Station Receiver with models
receivers using SIA and Contact ID reporting formats:
ITI CS-5000 Central Station Receiver.
Sur-Gard Central Station Receiver with models
SG-DRL2A and SG-CPM2.
UL-Canada Listed Systems
This section describes the requirements for ULC (UL
Canada) Listed systems.
Canada) Listed systems.
CSA Certified Accessories
Residential Burglary Alarm System Unit (ULC-S309)
Same as “UL Basic System and Household Burglary Alarm
System Unit (UL 1023).”
System Unit (UL 1023).”
California State Fire Marshall Listed
Systems
Systems
Same as Household Fire Warning System (UL 985).
Planning the Installation
This section describes the systems’s capabilities to help you
get familiar with the system. Appendix B provides planning
sheets with tables that let you record the hardware and pro-
gramming configuration of the system to help prepare for
system installation.
get familiar with the system. Appendix B provides planning
sheets with tables that let you record the hardware and pro-
gramming configuration of the system to help prepare for
system installation.
Standard System
Panel
The panel keypad provides complete system programming
and operation control. Displays system messages and indi-
cates system status.
and operation control. Displays system messages and indi-
cates system status.
DTIM
The DTIM allows the panel to communicate with the cen-
tral monitoring station.
tral monitoring station.
Note
The DTIM does not have a backup battery.
The following describes the system’s basic (out-of-box)
hardware capabilities.
Power: AC Class II, 8 VAC transformer.
Backup Battery 4.8 VDC rechargable NiCd battery
hardware capabilities.
Power: AC Class II, 8 VAC transformer.
Backup Battery 4.8 VDC rechargable NiCd battery
pack. (34-057)
One Supervised Hardwire Zone: Input for various hard-