UTC Fire & Security Americas Corporation Inc 801-IXT User Manual
Simon XT
User Manual
16
Using an offsite phone
If enabled by the installer, you can control your Simon XT panel remotely from an offsite phone. The panel
answers a phone call according to the dialing method programmed by your installer.
answers a phone call according to the dialing method programmed by your installer.
After a certain combination of rings and pauses, the panel will answer the call with the voice prompt Enter
your code. You must enter the correct code to gain access.
your code. You must enter the correct code to gain access.
If you are interacting with your panel and the panel hangs up on you, the system is calling in a report to the
central monitoring station or remote phone due to an action by you or someone at the security system site. The
actions listed in Table 6 may be performed from an offsite phone.
central monitoring station or remote phone due to an action by you or someone at the security system site. The
actions listed in Table 6 may be performed from an offsite phone.
Note: This feature is not verified for use by UL.
Table 6.
Phone controls
Action
Phone key presses
Comments
Disarm
1
System not already disarmed
Subdisarm
1
Must have used the master code to gain access; system
was disarmed
was disarmed
Arm doors and windows
2
Press 2 again to activate
No Delay
feature
Arm motion sensors
3
Press 3 again to activate
Latchkey
feature
Arm doors, windows, and
motion sensors
motion sensors
2
–
3
Check status
0
Turn light on
* –
<unit_num>.
N = 1-8, unit number
Turn light off
# –
<unit_num>.
N = 1-8, unit number
Turn all lights on
* – *
Turn all lights off
# – #
Hang up
9