Tripp Lite 2.9kW Single-Phase ATS / Metered PDU, 120V Outlets (24 5-15/20R, 1 L5-30R), 2 L5-30P, 2 10ft Cords, 2U Rack-Mount PDUMH30AT User Manual
Product codes
PDUMH30AT
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
Model #: PDUMH30AT
Single-Phase Auto Transfer Switch / Metered PDU, 30A 120V, 2U Horizontal Rackmount, NEMA 5-15/20R &
L5-30R outlets, two L5-30P inputs
L5-30R outlets, two L5-30P inputs
Highlights
2U rackmount Metered ATS PDU with 4 segment local current metering
Automatic Transfer Switch / ATS enables advanced redundant power
applications for single corded network devices
120V 30A total capacity (Agency de-rated to 24A continuous)
Two NEMA L5-30P inputs support separate primary and secondary input
connections
24 5-15/20R and 1 L5-30R outlets
Description
PDUMH30AT Metered ATS / Auto-Transfer Switch offers 120V 30A dual-input power distribution and visual current metering in a 2U horizontal
rackmount installation format. Set of two NEMA L5-30P line cords enable separate primary and secondary input connections. Includes 25 built-in
outputs (24 NEMA 5-15/20R and 1 L5-30R). Digital current metering with push-button display control tracks output power consumption in 4
segments: Bank 1 (12 upper 5-15/20R outlets), Bank 2 (12 lower 5-15/20R outlets), L5-30R (single outlet) and total PDU output. Supports 2U
installation in 2 or 4 post racks, with additional support for wall-mount and under-counter placement.
rackmount installation format. Set of two NEMA L5-30P line cords enable separate primary and secondary input connections. Includes 25 built-in
outputs (24 NEMA 5-15/20R and 1 L5-30R). Digital current metering with push-button display control tracks output power consumption in 4
segments: Bank 1 (12 upper 5-15/20R outlets), Bank 2 (12 lower 5-15/20R outlets), L5-30R (single outlet) and total PDU output. Supports 2U
installation in 2 or 4 post racks, with additional support for wall-mount and under-counter placement.
Tripp Lite’s Metered ATS / Auto-Transfer Switch PDU Systems provide redundant-power and hot-swappable UPS options for network and server
applications powered by a single input line cord. Separate PRIMARY and SECONDARY input line cords enable a redundant connection to two
separate mains circuits. ATS systems will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary
power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and
stable. Super-fast switchover between primary and secondary power sources occurs within 3-6 milliseconds. ATS functionality is supported by any
two compatible power sources, regardless of phase angle, to offer support for a variety of advanced redundant power networking applications.
Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant dual-UPS protection when each cord is
connected to a separate UPS system. In a dual-UPS configuration, the primary input cable must be supported by a full time sine wave online UPS.
Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate
mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates
power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front
input LEDs display primary and secondary power availability. Additional LEDs identify the displayed load segment reported by the digital current
display.
applications powered by a single input line cord. Separate PRIMARY and SECONDARY input line cords enable a redundant connection to two
separate mains circuits. ATS systems will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary
power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and
stable. Super-fast switchover between primary and secondary power sources occurs within 3-6 milliseconds. ATS functionality is supported by any
two compatible power sources, regardless of phase angle, to offer support for a variety of advanced redundant power networking applications.
Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant dual-UPS protection when each cord is
connected to a separate UPS system. In a dual-UPS configuration, the primary input cable must be supported by a full time sine wave online UPS.
Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate
mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates
power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front
input LEDs display primary and secondary power availability. Additional LEDs identify the displayed load segment reported by the digital current
display.
Applications
Ideal for datacenters, computer rooms and network closet applications to provide single-corded network hardware with redundant power in a
metered PDU format
Package Includes
Auto Transfer Switch PDU
Rackmount installation brackets
Installable plug-retention shelves & cable ties
Features
PDUMH30AT Metered ATS / Auto-Transfer Switch PDU offers 120V 30A dual-input power distribution and visual current metering in a 2U
horizontal rackmount installation format (Agency de-rated to 24A continuous)
Set of two 10 ft. / 3m NEMA L5-30P input line cords enable separate PRIMARY and SECONDARY input connections
Includes 25 built-in outputs (24 NEMA 5-15/20R and 1 NEMA L5-30R)
Digital current metering with push-button display control and indicator LEDs tracks output power consumption in 4 segments: Bank 1 (12
upper 5-15/20R outlets), Bank 2 (12 lower 5-15/20R outlets), L5-30R (single outlet) and total output of all three load banks combined