Tripp Lite 2.9kW Single-Phase ATS / Metered PDU, 120V Outlets (24 5-15/20R, 1 L5-30R), 2 L5-30P, 2 10ft Cords, 2U Rack-Mount PDUMH30AT Data Sheet

MODEL NUMBER: PDUMH30AT

 

 

 

Tripp Lite Metered ATS / Auto Transfer Switch provides a redundant power option for single-corded network

devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The

ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary

power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until

the primary input is restored and stable. Highly reliable solid-state switching between primary and secondary

power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power

sources, regardless of phase angle, to support a variety of advanced redundant power networking applications.

Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS

protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input

cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary

UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully

supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or

of lower quality than the primary source. Front input LED's display primary or secondary power availability. 

120V 30A Automatic Transfer Switch (ATS) / Metered PDU (Agency de-rated to 24A continuous)

Provides a redundant A/B power option for non-redundant networking equipment with a single input power cord

Visual meter reports output amp and kW power consumption, plus input voltage

2U horizontal rackmount form factor; 11.9 in. / 30.2 cm depth

25 outlets (24 5-15/20R, 1 L5-30R)

Set of two 10 ft. / 3m NEMA L5-30P input line cords enable separate PRIMARY and SECONDARY input connections

ATS circuits normally maintain output sourced from the primary input cable; As primary input power fails or becomes unstable, the ATS will switch to

maintain output sourced from the secondary input cable until power on the primary input is restored and stable

Highly reliable solid-state switching enables fast 1-5 millisecond transfer between primary and secondary inputs

Single phase 30A 120V Auto

Transfer Switch / ATS PDU;

Highly reliable Solid State

Switching

Enables redundant A/B power

option for single-corded network

devices

Separate primary & secondary

inputs connect to any two

compatible power sources

2U horizontal rackmount; 2

L5-30P inputs; 24 5-15/20R & 1

L5-30R outlets

Digital meter reports voltage, kW

load level and output amperage

in 4 load segments

Auto-Transfer Switch / Metered

PDU is ideal for providing

redundant A/B power to

single-corded network equipment 

ATS / Metered PDU

Rackmount installation brackets

Installable plug-retention shelves

& cable ties

1 / 4