Andrew Wireless Innovations Group BCEL-FAST719 User Manual

Page of 30
 
MN021-01 
Page 5  of 28
 
3. Health and safety warnings 
 
 
Antenna installation must conform within the following guidelines to meet FCC RF exposure 
limits, otherwise an environmental evaluation is required if: 
 
Broadband PCS (subpart E): 
 
Non building mounted antennas: 
Height above ground level to lowest point of antenna < 10m 
Radio (Part 24) and total power of all channels > 2000 W ERP 
(3280 W EIRP)  
Building-mounted antennas: 
Total power all channels>2000W ERP (3280W EIRP)  
Narrowband PCS (subpart D): 
 
Non-building-mounted antennas: 
Height above ground level to lowest point of antenna < 10m 
Radio (Part 24) and total power of all channels > 1000 W ERP 
(1640 W EIRP). 
Building-mounted antennas: 
Total power of all channels > 1000 W ERP (1640 W EIRP). 
Cellular Radiotelephone Service 
(Part 22, subpart H): 
 
Non-building-mounted antennas: 
Height above ground level to lowest point of antenna < 10m 
Radio (Part 22) and total power of all channels > 1000 W ERP 
(1640 W EIRP). 
Building-mounted antennas: 
Total power of all channels > 1000 W ERP (1640 W EIRP). 
Paging and Radiotelephone 
Service (Part 22, subpart E): 
 
Non-building-mounted antennas: 
Height above ground level to lowest point of antenna < 10m 
Radio (Part 22) and total power of all channels > 1000 W ERP 
(1640 W EIRP). 
Building-mounted antennas: 
Total power of all channels > 1000 W ERP (1640 W EIRP). 
Private Land Mobile Radio\ 
Specialized Mobile Radio (Part 90):     
 
Non-building-mounted antennas: 
Height above ground level to lowest point of antenna < 10m 
Radio (Part 90) and total power of all channels > 1000 W ERP 
(1640 W EIRP). 
Building-mounted antennas: 
Total power of all channels > 1000 W ERP (1640 W EIRP). 
 
 
 
 
 
IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the following 
antenna installation and device operating configurations must be satisfied: A separation 
distance of at least 20 cm must be maintained between the antenna of this device and all 
persons.  RF exposure compliance may need to be addressed at the time of licensing, as 
required by the responsible FCC Bureau(s), including antenna co-location requirements of 
1.1307(b)(3).  Maximum permissible antenna gain is: 
 
for the BCR-BCEL FAST719  is  15.4 dBi.  (Version TFAF731xx, TFLF734xx) 
for the BCR-BCEL-FAST819  is  11.5 dBi.  (Version TFAF23xx, TFLF23xx) 
 
 
 
 
For any clarification, please refer to FCC rules, 47 CFR ch. I, part 1.1307