Andrew Wireless Innovations Group BCEL-FAST719 User Manual

Page of 30
 
MN021-01 
Page 7  of 28
 
4.2. 
Services 
The BriteCell™ Fast system operates at the following standards: 
 
 
 
 
 
 
 
 
 
4.3. 
Functional description 
The BriteCell™ Fast system is a fibre optic distribution system for wireless signals. It consists of 
a donor unit (TFLF) feeding  up to 4 remote units (TFAF) in a star topology. Each remote unit 
directly feeds up to two coverage antennas.  The connection between the BTS and BriteCell™ 
FAST system can either be direct or through a repeater via a duplexed N-connector. 
 
Both donor and remote units are powered at –48VDC (telecom supply). Donor and remote units 
shall be connected with pre-connectorized composite fibre optic cable (cable with twin optical 
fibre and copper wire for remote supply).  
 
The system installation doesn’t require any particular calculation or setting, making it a real 
plug-and-play system. Some useful functionalities, software and hardware, simplifies diagnostic 
and commissioning: 
 
• 
Downlink optical power test point 
• 
Uplink adjustable gain setting 
• 
Link diagnostic by means of individual link LEDs 
• 
Downlink ALC (Automatic Level Control)  
• 
Optical AGC (Automatic Gain Control) 
 
The following picture shows a simplified system block diagram 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Figure 2  Britecell™ Fast System Block Diagram 
SERVICE 
BANDWIDTH 
 
Uplink [MHz] 
Downlink[MHz] 
TRUNKING RADIO 
806:824 
851:869 
AMPS 
824:849 
869:894 
GSM 
890:915 
935:960 
DCS 
1710:1785 
1805:1880 
PCS 
1850:1910 
1930:1990 
E-GSM 
880:915 
925:960 
 
BTS
 
Local
 
Unit
 
Mixed fibre-copper cable
 
Unit
 
Remote
 
Unit
 
Mixed fibre-copper cable
 
Mixed fibre-copper cable
 
Mixed fibre-copper cable
 
Fixed
 
Attenuator