Andrew Wireless Innovations Group M17P26 User Manual
5.1.
OPENING AND CLOSING OF THE CABINET
figure 5-1 Locker with key
figure 5-2 Front and top cover
screws
To open the cabinet of the remote unit, first
dismount the locker by unlocking it with the key
(which is part of the delivery)
(which is part of the delivery)
and pulling it out
carefully in direction of the arrow marked in
figure 5-1 Locker with key.
figure 5-1 Locker with key.
If the front cover is installed (see mechanical
installation in chapter) remove the cover by
loosening the four M5 socket head cap screws
(circle-marked in figure 5-2 Front and top cover
screws). Do not remove those screws. When
they are loosened, the front cover can be taken
off.
loosening the four M5 socket head cap screws
(circle-marked in figure 5-2 Front and top cover
screws). Do not remove those screws. When
they are loosened, the front cover can be taken
off.
Before opening the cabinet, disconnect the
To open the cabinet, unscrew the nine M5
socket head cap screws (captive) of the top
cover of the remote unit (see figure 5-2 Front
and top cover screws).
cover of the remote unit (see figure 5-2 Front
and top cover screws).
After maintenance work, re-connect mains.
Close the cabinet.
To ensure safe operation, mount the front cover
Check the status of the status LED. Ensure it is
showing a green light.
Front cover
Locker
Nine top
cover
screws
cover
screws