Andrew Wireless Innovations Group RPT-MMR8L User Manual
User’s Manual for Remote Unit
MMR8L L
Page 34
M0106ASB.doc
7.2. GENERAL
• To open the cabinet of the remote unit, first
dismount the locker by unlocking it with the key
(which is part of the delivery)
(which is part of the delivery)
and pulling it out
carefully.
figure 7-1 Locker with key
figure 7-2 Front and top
cover screws
• Then remove the front cover by loosening the
four M5 socket head cap screws (circle-marked
in figure 7-2 on the left). Do not remove those
screws. When they are loosened, the front cover
can be taken off.
in figure 7-2 on the left). Do not remove those
screws. When they are loosened, the front cover
can be taken off.
• To open the cabinet, unscrew the three M5
socket head cap screws (captive) of the top
cover of the remote unit.
cover of the remote unit.
figure 7-3 Position of mains
power switch
• Set the mains power switch inside to On (I):
• Close the cabinet.
• Close the cabinet.
)
Note: Do not forget to reinstall the front cover
afterwards to ensure safe operation.
• Check the status of the LED. Ensure it is showing
a green light.
Three top
cover
screws
cover
screws
Locker
Front
cover
cover
Mains
power
switch
power
switch