Biolog-id SSTABIOLOGID User Manual
Smart Storage Agitator User Manual
Version: 1.0
Validation date of the manual: 18/09/2018
12 of 27
The RFID tags compatible with the SST-A are passive tags.
2.4.4. Third party software.
The SST-A can subscribe a third-party software and communicate via its web service to share
/ exchange PC traceability data (standard communication protocol). The third-party software
can then request the SST-A to write data to the RFID tag memory.
/ exchange PC traceability data (standard communication protocol). The third-party software
can then request the SST-A to write data to the RFID tag memory.
In case of use of such software, compatibility validation will be performed.
The third-party system is responsible for interpreting the data received from the SST-A.
The third-party system is responsible for interpreting the data received from the SST-A.
3. Using Smart Storage Agitator (SST-A)
This chapter aims to present the SST-A operation.
3.1. Implementation of PC bags in SST-A:
Note: In diagnostic mode (verification of the operation of RFID and LEDs) the front of the
satellite flashes.
satellite flashes.
PC bags can be placed in any direction: in the width or length of the drawer. The maximum
number of PC bags allowed per drawer is 4 for large sizes and 8 for standard sizes.
number of PC bags allowed per drawer is 4 for large sizes and 8 for standard sizes.
The RFID tag must be placed on the label of the manufacturer of the bag containing the PC
face up to a maximum height of 1.9 cm above the bottom of the drawer.
face up to a maximum height of 1.9 cm above the bottom of the drawer.
1 - Open a drawer
2 – Positioning of the PC bag in the drawer