DISPLAY & TECHNOLOGY LIMITED 24G-WR1001NS User Manual

WR1001NS

 

25

Disable WPS: Check this box and clicking “Apply” will disable WPS function. WPS is 

turned on by default. 

Self-PIN Number: It is AP’s PIN.   

Start PBC: Clicking this button will invoke the Push Button Configuration of WPS. If one 

station wants to connect to the AP, it must click its PBC button in two minute. You can see 

the WPS LED flash this time.   

Client PIN Number: The length of PIN is limited to four or eight numeric digits. If the AP 

and Station input the same PIN and click “Start PIN” button in two minutes, they will 

establish connection and setup their security key. 

This page allows you setup the wireless schedule rule. Please do not forget to configure 

system time before enable this feature.