DISPLAY & TECHNOLOGY LIMITED 24G-WR1001NS User Manual
WR1001NS
26
4.4 Service Setup
There are two submenus under the Server Setup menu: Port Forwarding, DMZ. Click
any of them, and you will be able to configure the corresponding function.
4.4.1 Port Forwarding
If you configure the router as Virtual Server, remote users accessing services such as
Web or FTP at your local site via public IP addresses can be automatically redirected to
local servers configured with private IP address. In other words, depending on the
requested service (TCP/UDP port number), the router redirects the external service
request to the appropriate server.
Enable Port Forwarding: Check this box will enable Port Forwarding function.
IP Address: That external User accesses the router will redirect to this local IP.
Protocol & Port Range: The packet with this protocol and port will be redirected to the
local IP.
Comment: You can add some comment for this item.
Current Port Forwarding Table: The table shows all you have configured. You can
delete one or all.
4.4.2 DMZ
If you have a client PC that cannot run Internet application properly from behind the NAT
firewall or after configuring the Port Forwarding, then you can open the client up to
unrestricted two-way Internet access.