Arlo Technologies Inc. 18200352 User Manual

When you integrate Arlo into the SmartThings app, the motion sensitivity for each 
camera is set to a default of 80. If your camera works more effectively at a different 
setting, you can use the Arlo app to change it.

¾ To adjust the motion sensitivity level:

1. Tap 

the 

Arlo icon 

 on your mobile device.

If you are using a computer, enter 

in the address bar of a 

browser.

The Cameras page displays. 

2.  Tap or click Mode.

A list of cameras displays.

3.  Tap or click the  camera.

The Mode page displays.

4.  If you are not sure what motion sensitivity level you have been using, tap or 

click Edit

next to Armed mode.

The Edit Rule page displays.

5.  Tap or click Edit

 next to the rule that you want to edit.

6.  Under If the following, tap or click Edit

next to Motion is detected.

The Motion detection settings page displays.

7.  Note the motion sensitivity setting, but do not select Armed mode..

8.  Return to the Mode page.

9.  Tap or click Edit

next to SmartThings mode.

The Edit Rule page displays.

10. Tap or click Edit

 next to the rule that you want to edit.

11. Under If the following, tap or click Edit

next to Motion is detected.

The Motion detection settings page displays.

12. Set the motion sensitivity level to match the setting that you viewed in Step 7.

DRAFT