Bose Corporation 418775 User Manual
16 - English
Using the System
Programming the universal remote
You can program the universal remote to control your source, such as a TV, DVD/
Blu-ray Disc
Blu-ray Disc
™
player, cable/satellite box, game system or DVR, by entering the
code for your source’s brand. There may be several codes for your source. You
may need to perform this procedure multiple times to locate the correct code.
may need to perform this procedure multiple times to locate the correct code.
Locate your source’s code
1. Power on your source.
2. Locate the code for your source’s brand in the Universal Remote Device
Codes book (provided).
Enter your source’s code
1. On the remote control, press and hold the appropriate source button until all
six source buttons glow, then release.
For example, to program your TV, press and hold
until all six source
buttons glow, then release.
The appropriate source button continues to glow.
2. On the number keypad, enter the code for your source’s brand and press + on
the volume button.
Test your source’s code
1. Test your source for basic functions. Follow the instructions for your source:
• TV: press the channel buttons. Press
. The settings menu appears.
Press
and
to navigate.
• Cable/satellite box: press
. The programming guide appears. Press
and
to navigate.
• DVD or Blu-ray Disc
™
player: press
. The settings menu appears.
Press
and
to navigate.
• Game system: press
and to navigate through your menu.
2. Based on your source’s response to basic functions:
• Remote responds accurately: press
to exit programming and
save your settings.
• Remote does not respond or does not respond accurately:
– If your source button glows: press + on the volume button to move to
the next code. Repeat steps 1-2 in “Test your source’s code”. You may
need to repeat this procedure 30 or more times. If all six buttons blink
three times, you have cycled through all codes for your source.
need to repeat this procedure 30 or more times. If all six buttons blink
three times, you have cycled through all codes for your source.
– If your source button is off: your remote exited programming mode.
Repeat steps 1-2 in “Enter your source’s code” and steps 1-2 in “Test
your source’s code”.
your source’s code”.
Tip: After you exit programming mode, press the appropriate source button to
use your source.
Note: Your source may not be compatible with universal remote controls. Refer to
your source’s owner’s guide for more information.