Bose Corporation 418775 Manuale Utente

Using the System

You can program the universal remote to control your source, such as a TV, DVD/
Blu-ray Disc

™

 player, cable/satellite box, game system or DVR, by entering the 

code for your source’s brand. There may be several codes for your source. You 
may need to perform this procedure multiple times to locate the correct code.

1.  Power on your source.

2.  Locate the code for your source’s brand in the Universal Remote Device 

Codes book (provided).

1.  On the remote control, press and hold the appropriate source button until all 

six source buttons glow, then release. 

For example, to program your TV, press and hold 

 until all six source 

buttons glow, then release.

The appropriate source button continues to glow. 

2.  On the number keypad, enter the code for your source’s brand and press + on 

the volume button.

1.  Test your source for basic functions. Follow the instructions for your source:

•  TV: press the channel buttons. Press 

. The settings menu appears. 

Press 

 and 

 to navigate.

•  Cable/satellite box: press 

. The programming guide appears. Press 

 and 

 to navigate.

•  DVD or Blu-ray Disc

™

 player: press 

. The settings menu appears. 

Press 

 and 

 to navigate.

•  Game system: press 

 and   to navigate through your menu.

2.  Based on your source’s response to basic functions:

•  Remote responds accurately: press 

 to exit programming and 

save your settings.

•  Remote does not respond or does not respond accurately:

 

 

–  If your source button glows: press + on the volume button to move to 

the next code. Repeat steps 1-2 in “Test your source’s code”. You may 
need to repeat this procedure 30 or more times. If all six buttons blink 
three times, you have cycled through all codes for your source.

 

–  If your source button is off: your remote exited programming mode. 

 Repeat steps 1-2 in “Enter your source’s code” and steps 1-2 in “Test 
your source’s code”.

Tip:   After you exit programming mode, press the appropriate source button to 

use your source.

Note:  Your source may not be compatible with universal remote controls. Refer to 

your source’s owner’s guide for more information.