Panasonic Corporation of North America 9TAWX-CT2020 User Manual

6

Caution: Setup of this product should only be performed

by qualified service personnel or system installers.

● Opening the Switch Pocket

1. Press the power button to turn off the order taker unit.

2. Open the switch pocket by moving the lid.

3. Set the channel selector and DIP switches. (Refer to

p. 7 "Channel Group Selection, "DIP Switch Setup", and
"Channel Interference Check".

4. After finishing the setup, close the switch pocket by

moving the lid.

5. Turn on the order taker unit.

Notes: Be sure to turn off the order taker unit in Step 1.

Otherwise, the channel group (refer to p. 7 "Channel
Group Selection") will not be activated until you turn off
and on the power again.

● Turning the Power On/Off

1. Press the power button to turn on the order taker unit.

2. After using the order taker unit, press the power button

again to turn off the unit.

q

w

• Refer to the operating instructions included with the

battery and battery charger.

• Prepare a fully charged battery.
• Battery replacement is recommended when the power

indicator lights up in red and a constant beep is heard
in the headset.

● Loading

Insert the battery as shown in the figure.
Note: Be sure to insert it until the lock clicks. 

EJECT

WX-CT2020

● Replacement

1. Slide the battery lock to the upside.

2. Remove the battery.

EJECT

WX-CT2020

q

w

PW

R

VOL