Furuno USA Inc 9ZWRTR115 User Manual
1. INSTALLATION
7
Installation with the radome mount
The optional radome mount lets you fasten the radar sensor to a mast on a sailboat.
Name, Type: Radome Mount, OP03-208
Code No.: 001-078-340
Code No.: 001-078-340
How to assemble the bracket
1. Fasten the fixing plates to brackets (1) and (2) with four M8
20 hex bolts.
2. Fit brackets (1) and (2) loosely with support plates (1) and (2) using four M4
12
hex bolts, so that the gap between the brackets can be adjusted.
3. Place the mounting plate on the bracket and fix it loosely with four M8
20 hex
bolts.
How to fasten the bracket to the mast
1. Drill eight holes of 6.5 mm diameter in the mast and fix the bracket with eight stain-
less steel rivets (local supply) of 6.4 mm diameter.
2. Fasten the bolts on the bracket.
3. Fasten the radar sensor to the bracket.
Connect the power cable to the power source, observing the guidelines for laying the
power cable shown on this page.
3. Fasten the radar sensor to the bracket.
Connect the power cable to the power source, observing the guidelines for laying the
power cable shown on this page.
Name
Type
Code No.
Qty
Mounting plate
03-018-9001-0
100-206-740-10
1
Support plate (1)
03-018-9002-0
100-206-753-10
1
Support plate (2)
03-018-9003-0
100-206-763-10
1
Fixing plate
03-028-9004-3
100-206-773-10
2
Bracket (1)
03-028-9005-0
100-206-780-10
1
Bracket (2)
03-028-9006-0
100-206-790-10
1
Hex bolt w/washer
M8
20 SUS304
000-162-955-10
8
Hex bolt w/washer
M4
12 SUS304
000-162-956-10
4
Mounting plate
Support plate (1)
Support plate (2)
Bracket (1)
Fixing plate
M8×20
ASSEMBLED RADOME MOUNT
M8×20
M8×20
M4×12
M10×25
How to fasten the sensor to the radome mount
Bracket (2)
Rivet
How to assemble the radome mount