ICOM 281600 User Manual
23
4
BIIS OPERATION
■
Transmitting an SDM
D General
The short data message, SDM, can be sent to an individual
station or group stations. Also, 8 SDM memory channels are
available and the messages can be edited via PC program-
ming.
station or group stations. Also, 8 SDM memory channels are
available and the messages can be edited via PC program-
ming.
D Transmitting an SDM
q
While in the standby condition, push [P1] (Digital), then
push [UP] or [DOWN] to select the desired station/group
code.
code.
w
Push [P1] (Digital) again, then push [UP] or [DOWN] to
select the desired SDM.
Or, you can select the desired SDM using [Status Up]/
[Status Down] key directly.
e
Push [P0] (Call) or [PTT]* to transmit the SDM to the
selected station/group.
*PTT call can be made only when PTT call capability is permitted.
• 2 beeps will sound and the transceiver returns to the standby
• 2 beeps will sound and the transceiver returns to the standby
condition automatically when the transmission is successful.
SDM is displayed.