ICOM 281600 User Manual

25

4

BIIS OPERATION

■

 

When the optional cable and a GPS receiver is connected to 
the transceiver, the position (longitude and latitude) data can 
be transmitted automatically.
Ask your dealer or system operator for connection details.

The position data is transmitted when;

• Status 24 message is received

  *When the status 24 message, GPS request, is received.

• Fully automatic
   When automatic position transmission is enabled, send 

the position data according to ‘Time Marker’ and ‘Interval 
Timer’ settings.

• PTT is released
  When ‘Send with Logoff’ is enabled.
  -  Set the ‘Log-In/Off’ item as ‘L-OFF.’
• After sending a status message
  When ‘Send with Status’ is enabled.
• After sending an SDM
  When ‘Send with SDM’ is enabled.
• After sending status 22 (Emergency)
  When ‘Send with Emergency’ is enabled.

■

 

When the optional cable is connected to the transceiver, a 
printer can be connected to print out the received SDM con-
tent and the ID of the station who sent the message.
Ask your dealer or system operator for connection details.

■

 

The own ID can be transmitted each time the PTT is pushed 
(log-in) or released (log-off) during individual or group call 
communications.
By receiving the ANI, the communication log can be record-
ed when using a PC dispatch application.

In addition, when using the ANI with log-in, the PTT side 
tone function can be used to inform you that the ID is sent 
and voice communication can be performed.