ICOM 382200 User Manual
55
10
MENU SCREEN
■
Radio Settings items
Scan Type
(Default: —)
The transceiver has 2 scan types. Select Normal Scan and
Priority Scan.
Priority Scan.
• Normal Scan: Scans all Favorite channels in the selected
channel group.
• Priority Scan
: Sequentially scans all Favorite channels,
while monitoring Channel 16.
L The default setting differs, depending on the transceiver version.
Scan Timer
(Default: Off)
You can use the Scan Timer to pause, or to resume after 5
seconds, when a signal is detected.
• On: When a signal is detected on a channel, the scan
seconds, when a signal is detected.
• On: When a signal is detected on a channel, the scan
pauses for 5 seconds, and then resumes. If the
signal disappears in less than 5 seconds, the scan
immediately resumes.
signal disappears in less than 5 seconds, the scan
immediately resumes.
• Off: When a signal is detected on a channel, the scan
pauses until the signal disappears, and then resumes.
Dual/Tri-watch
(Default: Dualwatch)
Select Dualwatch or Tri-watch.
• Daulwatch
• Daulwatch
: Monitors Channel 16 while receiving on
another channel.
• Tri-watch
: Monitors Channel 16 and the Call channel
while receiving on another channel.
LSee page 18 for details.
CHAN Group
(Default: —)
Select the suitable channel group for your operating area.
Select INT, USA, CAN, DSC, or ATIS depending on the
transceiver version.
transceiver version.
LSee page 12 for details.
WX Alert
(Default: Off)
For the USA, Australian, and Export versions, an NOAA
broadcast station transmits a Weather Alert tone before any
important weather information.
L
“WX
” is displayed instead of “WX.”
L
“WX
” blinks until you push a key after detecting an alert.
• On with Scan: The preset Weather channels are
sequentially checked while scanning.
• On:
The previously selected (last used) Weather
channel is checked while scanning.
channel is checked while scanning.
• Off
:
The Weather Alert tone is not detected.
Monitor
(Default: Push)
Hold down [VOL/SQL] for 1 second to turn ON the Monitor
function. The squelch opens.
You can select whether the squelch closes when you release
[VOL/SQL], or when you push any key.
• Push
• Push
: The squelch stays open while holding down
[VOL/SQL].
• Hold
:
The squelch stays open until you push any key.