ICOM 382200 Manuale Utente

55

10

MENU SCREEN

■

(Default: —)

The transceiver has 2 scan types. Select Normal Scan and 
Priority Scan. 

• Normal Scan:  Scans all Favorite channels in the selected 

channel group. 

:  Sequentially scans all Favorite channels, 

while monitoring Channel 16.

L The default setting differs, depending on the transceiver version.

(Default: Off)

You can use the Scan Timer to pause, or to resume after 5 
seconds, when a signal is detected.
• On:   When a signal is detected on a channel, the scan 

pauses for 5 seconds, and then resumes. If the 
signal disappears in less than 5 seconds, the scan 
immediately resumes. 

• Off:  When a signal is detected on a channel, the scan 

pauses until the signal disappears, and then resumes.

(Default: Dualwatch)

Select Dualwatch or Tri-watch. 
• Daulwatch

:   Monitors Channel 16 while receiving on 

another channel.

:   Monitors Channel 16 and the Call channel 

while receiving on another channel.

LSee page 18 for details.

(Default: —)

Select the suitable channel group for your operating area. 

Select INT, USA, CAN, DSC, or ATIS depending on the 
transceiver version.

LSee page 12 for details.

(Default: Off)

For the USA, Australian, and Export versions, an NOAA 

broadcast station transmits a Weather Alert tone before any 

important weather information.

L

“WX 

” is displayed instead of “WX.”

L

 “WX 

” blinks until you push a key after detecting an alert.

• On with Scan:   The preset Weather channels are 

sequentially checked while scanning.

• On:  

The previously selected (last used) Weather 
channel is checked while scanning.

: 

The Weather Alert tone is not detected.

(Default: Push)

Hold down [VOL/SQL] for 1 second to turn ON the Monitor 

function. The squelch opens. 

You can select whether the squelch closes when you release 

[VOL/SQL], or when you push any key.
• Push

:   The squelch stays open while holding down  

[VOL/SQL].

: 

The squelch stays open until you push any key.