ODSONIC INTERNATIONAL CO. LIMITED 9200N User Manual
- 22 -
Quick Reminder..
◆
Maximum number of Smart Bulbs is 8 bulbs, when pairing to one Camera through the APP, with
two groups available for assignment.
◆
Maximum number of Smart Bulbs is 16 bulbs, when pairing directly to the Remote Control, with
four groups available for assignment.
3.5.8 Slippage Detection
(1)
Sensor Pairing
- Place the sensor within 2m of the camera and press the “Pair” button on
the APP.
(Please make sure there are no obstructions between the sensor
and the camera, such as a wall partition.)
- Hold the “Pairing Button” for 3 seconds, when the indicator light turns
green the pairing was successful.
※
Supplementary Information: Sensor’s reaction to different events.
- If the PIR turns red, it means it has detected the presence of a person
and it working as intended.
- When someone slips in the the detection zone of the sensor, the indicator
light will turn red and flash twice, and turn on the Thermal Imaging Sensor.
- If someone stays still on the ground, in the detection zone for 10 seconds,
the indicator light will stay red for the 10 second detection duration.
- After the 10 second detection duration, the sensor will trigger and the
indicator light will flash red four times and at the same time send an alert
to the Camera and trigger a push notification alert.
★
Attention! The Slippage Detection must be paired first, before being installed.
PIR Sensor
Thermal Image Sensor
-Slippage Detection
Pairing Button