ODSONIC INTERNATIONAL CO. LIMITED 9200N User Manual
- 23 -
Quick Reminder..
◆ If an elderly person has fallen down and is unable
to move for more than 10 seconds. At this point it
is recommended for the person to simply lie down
in the detection zone and not move. In order to
trigger the sensor and result in a push notification
alert.
◆ Special Situation: If the person’s waist size is too
large, detection may not be possible. Reason being the heat signature of the head may be blocked by
the stomach. Therefore in this specia situation the sensor may not be able to detect the slippage
event.
(2)
Sensor Installation After Pairing.
A
○
1
E
A
Please bring the sensor to your desired location or where slippage may
happen; for example the bathroom, or the bedside.
(Note
：
We will illustrate using the bathroom as an example.)
A
○
2
E
A
After confirming the location for installation, please find a wall that is
suitable for installing the sensor where it will cover the best area to detect
a slippage.
A
○
3
E
A
Position of Sensor
：
Using a tape measure, find a location
40~50 cm from the base of floor. (You may make a marker)
A
○
4
E
A
Place the top of the sensor where the marker
is, if there’s no obstruction in the way,
you may secure the sensor.
(*Refer to the following diagram
for standard installation)
★
Overall Standard
Installation Illustration
Installation Illustration
★