MEDTRUM TECHNOLOGIES Inc. FM006 User Manual

 

16 

 

The PDM is designed to only accept a new AAA battery.   

Note: Do NOT use any other type of batteries than AAA alkaline batteries to power the PDM. Never use old or used 

batteries; the PDM may not work properly. 

As a safety measure, if you install a battery that does not have full power, the WEAK BATTERY or FAILED BATT 

TEST alarm may sound. If you receive a WEAK BATTERY alarm, respond to the alarm and continue. The pump will 

still operate normally, but with a decreased battery life. The PDM uses one AAA alkaline battery. 

1.  Make sure all the following apply: 

y Clear 

(ESC, OK) any alarms and/or alerts before removing and replacing the battery. 

y 

Make sure the PDM is at the HOME screen when you remove the battery. 

y 

Do NOT remove the battery during a bolus or a Patch change process. 

2.  Open the battery compartment on the back of the PDM by pushing the compartment latch along with the 

direction of arrow and lifting upward.