Shenzhen Minde Electronics Technology LTD. MS3390 User Manual
21
5-2 Data Transfer
5-2-1 Bluetooth
See
listed below.
Out of range batch- The scanner starts storing barcode data when it loses its connection to a remote
host (for example, when a user holding the scanner walks out of range). Data transmission is triggered
by reestablishing the connection with the host (for example, when a user holding the scanner walks back
into range).
Auto reconnection- When scanner’s Bluetooth is power on, it will try to establish the wireless connection
with the host which it last connected, if Auto Reconnection is enabled.
Inter-char delay- Inter-character delay is abbreviated to Inter-char delay. This delay is inserted after each
data character transmitted when configure Bluetooth to HID keyboard profile. Some Bluetooth
communication needs large delay to avoid data missing. This default delay is set to 8 milliseconds.
BA2110 Connect Time- This is a standby time for the user to plug the BA2110 into PC after scanned the
barcode on the back of BA2110. The default standby time is set to 10 seconds. (For more detail, please
refers to
Out of range batch- The scanner starts storing barcode data when it loses its connection to a remote
host (for example, when a user holding the scanner walks out of range). Data transmission is triggered
by reestablishing the connection with the host (for example, when a user holding the scanner walks back
into range).
Auto reconnection- When scanner’s Bluetooth is power on, it will try to establish the wireless connection
with the host which it last connected, if Auto Reconnection is enabled.
Inter-char delay- Inter-character delay is abbreviated to Inter-char delay. This delay is inserted after each
data character transmitted when configure Bluetooth to HID keyboard profile. Some Bluetooth
communication needs large delay to avoid data missing. This default delay is set to 8 milliseconds.
BA2110 Connect Time- This is a standby time for the user to plug the BA2110 into PC after scanned the
barcode on the back of BA2110. The default standby time is set to 10 seconds. (For more detail, please
refers to
5-2-2 USB HID keyboard
When the scanner is USB connected to a PC, it will be identified as a USB HID keyboard and behaves
as a USB wired scanner.
as a USB wired scanner.
5-2-3 USB Virtual COM
When the scanner is USB connected to a PC, it will be identified as a USB Virtual COM and acts as a
RS-232 wired scanner.
RS-232 wired scanner.
5-2-4 U Disk
Barcode data is always stored in a text file (TXT file), that is, the scanner functions as a barcode data
collector. The scanner will be identified as a USB removable driver when it is USB connected to a PC.
The scanner decides target file to store barcodes according to following rules:
collector. The scanner will be identified as a USB removable driver when it is USB connected to a PC.
The scanner decides target file to store barcodes according to following rules:
If a file is selected by the user, the selected file will be the target file.
If there is no file in the U-Disk, a file will be created and named “TARGET.txt” by the scanner when it
is powered on or restart. In this case, TARGET.txt will be the target file.
is powered on or restart. In this case, TARGET.txt will be the target file.
The file selected to be the target file is labeled √.
1) Create New Files
Note:
1. Files can be opened/edited/saved/renamed/deleted by the user of a PC and
1. Files can be opened/edited/saved/renamed/deleted by the user of a PC and
created/emptied/deleted by the user of a mobile scanner.
2. A valid filename, not including the suffix, is composed of up to 8 characters from three groups:
Upper case letters “A”–“Z”, Numbers 0–9 and special sign ! # $ % & ' ( ) - @ ^ _ ` { } ~ .