Shenzhen Minde Electronics Technology LTD. MS3390 User Manual
23
4) Format a U Disk
Note 1: The format function is a quick way to empty a whole U Disk.
Note 2: Please format the U Disk once before the first time of use.
Note 2: Please format the U Disk once before the first time of use.
Caution:
1. Format operation will erase all data on the disk.
2. Format operation is not undoable. It is strongly recommended to back up the data
before format operation.
2. Format operation is not undoable. It is strongly recommended to back up the data
before format operation.
5) Data batch
The scanner starts storing barcode data in Date Batch mode. The collected barcode data can then be
sent to a host via Bluetooth/USB. Three options are listed below.
Send batch data- Data transmission is triggered by this menu command. Before undertaking this
operation, make sure a communication link (Bluetooth network or USB cable) is working.
Interfaces- There are three types of communication interfaces Bluetooth, USB HID keyboard and USB
virtual COM. A Bluetooth link is needed in the first case (See
sent to a host via Bluetooth/USB. Three options are listed below.
Send batch data- Data transmission is triggered by this menu command. Before undertaking this
operation, make sure a communication link (Bluetooth network or USB cable) is working.
Interfaces- There are three types of communication interfaces Bluetooth, USB HID keyboard and USB
virtual COM. A Bluetooth link is needed in the first case (See
).
Data statistics- User can select to enable/disable the Data Statistics. When it is enabled, the number of a
barcode would be added to the end of the barcode. The eighth barcode is “123456789” in the example
below.
Example:
barcode would be added to the end of the barcode. The eighth barcode is “123456789” in the example
below.
Example: