Genexis B.V. T24W1 User Manual

8

4. Wireless setup

Step 1:
To set up the wireless connection between your computer and 
the Hybrid Live! you may need the SSID and WPA key of the 
Hybrid Live!. The SSID is the name of the wireless network. 
The WPA key is the password needed for your secured wire-
less network. The default SSID and the WPA key are printed on 
the label on the rear of your Hybrid Live!. 

You may write down these values here:

SSID: _____________________________________________________

WPA key: _________________________________________________

Step 2:
(Instructions for Windows Vista / Windows 7; for other 
operating systems please contact your service provider)

•

Go to “Start” at the bottom left corner and click on 
“Control Panel”.

•

The Control Panel window will appear. Click on “View 
Network Status and Tasks” at the “Network and 
Internet” category.

•

The Network Connections window will appear. Click 
on the “Connect to a network”.

•

Show “Wireless” and select the network (SSID) that is 
printed on the label.

•

If requested press the WPS button on your Hybrid 
Live!. Alternatively you can connect using the WPA key 
that is printed on the label.

•

Your connection is now operational. Open your web 
browser and verify that your connection is working. 
If your connection is not working, please refer to the 
troubleshooting section. 

•

After installation you can manually change the SSID 
and WPA key, by using the web-interface of the Hybrid 
Live!.