Wuxi MitraStar Technology Co. Ltd DSL100HNUT1V3 User Manual

Chapter 8    Static Route

108

Use this screen to view and configure IP static routes on the Device. Click Network Setting > Static 

Route to open the following screen. 

Figure 70 Network Setting > Static Route

The following table describes the labels in this screen. 

Table 34   Network Setting > Static Route 

Add New 

Static Route

Click this to set up a new static route on the Device.

#

This is the number of an individual static route.

Destination IP

This parameter specifies the IP network address of the final destination. Routing is always 

based on network number. 

Gateway

This is the IP address of the gateway. The gateway is a router or switch on the same 

network segment as the device's LAN or WAN port. The gateway helps forward packets to 

their destinations.

Subnet Mask

This parameter specifies the IP network subnet mask of the final destination.

Interface

This is the WAN interface through which the traffic is routed.

Metric

This is the “cost” of transmission for routing purposes. 

Modify

Click the Edit icon to go to the screen where you can set up a static route on the Device.
Click the Delete icon to remove a static route from the Device.